Ohio State buckeyes logo Decal-Sticker-Yeti--Computer-Car window-Truck

Description

Ohio State buckeyes logo Decal-
Size
: Measured at largest point height or width
Material
: Color Layer Outdoor Vinyl rated for
5+ years ADD Your Color in order. Solid Colored Vinyl, Not inkjet
CornHole is 2 18" Decals with 2 targets. Cornhole Boards must be finished, paint or clearcoat, before decal is installed.
This vinyl decal works great for vehicles, bikes, helmets, skateboards, banners,glass, and metal surfaces......
It may also be applied to finished wood surfaces
Easy to apply,durable, washable, weather proof.
Instead of a digital printer applying
INK
or
PIGMENT
onto a sheet of vinyl, die-cut stickers (or more aptly
kiss-cut stickers
) are already colored rolls of vinyl adhesive material. These vinyl rolls comes in numerous colors we can order any color but may delay delivery.
Our decals are cut with a precision vinyl cutting machine, into the shape of the sticker. A
transfer tape
is applied on top of the decal, to keep the individual parts of the sticker intact during application. The transfer tape is removed after installation, leaving
only the letter or graphic will be installed.
Because the background is the surface that the stickers are applied to, we recommend that you choose a vinyl color that contrasts the application surface.
For instance, if you are purchasing to install on a car window
, the most visible vinyl color would be white, as your rear window is tinted from factory. Instead of placing these decals onto your glass, if you are planning to place it on the rear of your white box truck or trailer, the more appropriate color would be black or blue.
Materials
Vinyl decal (comes in three layers: Backing, vinyl and transfer tape).
Squeegee (can also use an old credit card)
Surface Cleaner (Isopropyl alcohol with a spray bottle works well)
Application Solution For Larger Decals(3 parts water, 1 part isopropyl alcohol, 3-4 drops of dish soap or baby shampoo)
Tape Measure
Masking Tape
Lint Free Towel or Cloth
China Marker or Grease Pencil
Preparation
For best results, room temperature and the temperature of the intended surface should be between 50° and 90° F.
The surface you intend to install your vinyl graphics on should be smooth and clean. Surfaces with too pronounced a texture make it difficult for the decal to adhere.
Clean the surface thoroughly with isopropyl alcohol. Before the alcohol evaporates, wipe dry with a lint free cloth. This insures the surface is free of dirt, oil, and wax. Test a small inconspicuous area first when you clean.
Installation
Before you begin, position the decal on your surface and determine where it will go. For larger decals, I like to find the centerpoint and mark the transfer paper. Then, measure and find the center of the area you?re applying the graphic to. Next, line up the decal and the area. Use masking tape to tape the decal onto the area. It?s always a good idea to measure several times. I use a grease pencil to help determine exactly where the decal will go.
Next, create a hinge on the top of the decal, apply a horizontal strip of masking tape over the top edge of the graphic. This makes sure your graphic stays in place for the installation.
Hold the bottom edge of the graphic away from the surface and remove the paper backing from the top. For larger graphics, you may want to cut between the letters with scissors and apply in smaller sections. Make sure the vinyl doesn?t fall back onto itself?decal to decal will stick together quickly.
Step 4 is for Larger Decals-While holding the graphic away from the surface, spray the surface and the adhesive with the application solution that you mixed earlier. Using the squeegee, and starting from the top, center?begin to apply pressure to the application tape and slowly work your way down to the bottom. Always work from top to bottom and make sure the entire graphic doesn?t fall onto the surface. Using overlapping strokes and working slowly from the top will help avoid air pockets in the vinyl.
Starting at the top again, use firm pressure with the squeegee to force the application fluid out from underneath the vinyl. Allow a few minutes for the vinyl to adhere to the surface.
Now you are ready to remove the application tape. For High Detail Decals it helps to let transfer tape sit for at least 3 hours and up to 24 before removal.  Spray the tape with your application fluid mixture. Wait a few minutes for this to soak in until the tape begins to bubble and wrinkle. Remove the app tape by gently pulling the tape at an angle to reveal the graphic underneath. Be careful not to pull straight away from the surface as this may cause the vinyl to release or cause air bubbles.
Using the paper backing that you removed earlier, squeegee the vinyl again with the paper backing over the vinyl to protect it from scratches. This step allows you to force any additional moisture and air from under the vinyl. Use a pin to poke any air or water pockets and press them with your finger.
CONGRATULATIONS! You?ve installed your Ohio State Buckeyes logo vinyl graphics successfully.
SHIPPING INFO! Important!
The post office is running understaffed in many facilities, causing shipping delays of up to 3 weeks.  I've been told this will be worse once holiday shipping starts. If you choose free shipping I will replace or refund anything that doesn't arrive in 35 days. Primarily larger packages (5-6%)  have been then ones held up.
If You need your item sooner I do have ups shipping available for a little bit more. We felt it would be best to let each individual choose the option that's best for them.
I'm not sure what the best solution is to serve each customer, If you have any questions please reach out and ask.